Terms & Conds
View Cart | Checkout
HomeSite MapSearchCheckout Store TopUp a LevelContact Us
Just Engines Online | Accessories | Starting Gear
Power Panels, Glow Plug Clips & Leads, Plug Spanners, Starters and much more!
OUT OF STOCK
A low cost fully featured power panel with adjustable glow plug current and ammeter. Supplied with battery connectors and leads plus matching banana plugs for your glow clip, fuel pump and starter.
A low cost 'peg' type glow clip. Supplied pre-wired and complete with long leads and crocodile clip connectors. Suitable for all normal glow plugs and many engines fitted with glow leads.
Lock on Glow Clip (short - 65mm) with leads and insulated crocodile battery connectors.
Lock on Glow Clip (long - 90mm) with leads and insulated crocoldile battery connectors.
This stylish Glow starter wouldn't look out of place in anyone's field box. As well as being stylish and hardwearing, this Aluminium Glow starter can save you a lot of bother, the handy power meter shows you what's going on. It can tell you if your Glow Plug has blown and it will also tell you when it needs recharging. This is another one of those useful tools that you will wonder how you managed without! We are supplying this item complete with a 3800 mah NiMH Cell, this should last you all day..Buy together with glow start mains charger for just £22.30 Tick box to add a mains charger for only £4.20, see below for charger details.
The perfect solution for starting your multi cylinder glow engine without the need for an on-board glow system or a massive battery pack. It is powered by a single cell 6000 ma 100C lipo and gives out a 90 second pulse that will power up to seven glow plugs. Long enough to get your engine started.
Remote glow lead which uses a 'dummy' plug which is positioned away from the engine. Ours is extra long - 320mm of lead and is supplied complete with earth lead.
Glow connector like a mini spark plug lead. For use with remote/onboard systems
An internal clip in the long arm of this spanner holds plugs tight for easy installation and removal. A very useful bit of kit.
A small engine can give a nasty cut - a large one can easily break a finger. This rubber finger guard has a durable ribbed construction to help protect you if you prefer to hand start your engines.
This baby has started everything we have thrown at to date including a Fuji 50cc ; Moki 2.10; Zenoah 45cc and 1.80 Four Stroke! It weighs only 1080g and is 170mm long and 46mm in diameter. Easily the best value geared starter on the market today. Geared at 4:1.Due to customer demand we have added an alternative, large, starter cone and rubber insert to our range, for our geared starter. This is for purchase as an optional extra if you have larger engines fitted with spinners and/or engines fitted with large spinners. This is simple to fit and can be interchanged with the smaller cone as supplied with the starter.
The ever popular JEN 4:1 geared starter now has a big brother; the JEN 6.5:1 geared starter is rated up to 24 volts. It comes with the large cone and large rubber insert as standard to give you maximum power transfer. The difference stops there. Otherwise it's the same physical size as the 4:1 and only a little heavier at 1130g compared to 960g.The JEN 6.5 :1 promises to carry on where the 4:1 leaves off; taking the larger engines in hand.Specifications:12 - 24 volt motor with carbon brushes6 :1 geared reduction all metal gearsCone 60mm diameterPlease note, It has come to our attention under certain conditions the use of LiPo batteries can over power the starter and cause the switch contacts to weld on. Because of this we cannot recommend the use of or guarantee the starter if used with LiPo batteries. We recommend the use of gel cell or NiMh batteries.
Especially designed to fit the 4:1 and 6.5 : 1 geared starter. Laser cut from zinc plated steel the battery carrier bolts to the starter to carry most sizes of battery, up to 50 x 35mm in section. (Battery for illustration only and not included).
Due to customer demand we have added an alternative, large, starter cone to our range, for our geared starter. This is for purchase as an optional extra if you have larger engines fitted with spinners and/or engines fitted with large spinners. This is simple to fit and can be interchanged with the smaller cone as supplied with the starter.
Large rubber insert for use with large starter cone.
Designed for tougher applications such as ducted fans; large model boats and helicopters the Dynatron packs a massive punch. Can also be run on 24v batteries for even more power.Please note this is a special order item and is not kept in stock.
Don't wreck your spinner when your starter rubber is past it's useful life. This low cost insert is suitable for the majority of starters and it is reversable for direct starting on the prop nut if no spinner is used.
This starter rubber is made by Sullivan and is ideal for their starters. It is also suitable for the majority of other starters available today. It is high quality and reversible for starting with spinners or with prop nuts.