Product Sections

Main Pages

Just Engines Home Page

Just Engines Infomation

Just Engines Model Fuel Info

Just Engines Links

New Products

FS-95V

£260.00

The first in a completely new series of four stroke engines. With its deliberately 'retro' styling reminiscent of the very first OS four strokes. The original ...
find out more

NGH GT9

£165.00

This is the latest in the growing line up and as far we know the smallest production petrol engine. So small in fact there was not ...
find out more

Keleo collector ring

£110.00

Keleo collector ring for ASP 400R also fits Magnum, SC and PH. These are hand made in the USA all welded aluminium. The are designed to screw directly into the ...
find out more

High temperature tube for smoke systems (50cm)

£5.10

This neoprene tube is good for connecting to smoke injectors where other tube can melt. 50cm length
find out more

Zenoah Elec' Ignition - G23SLH, G26EI, G26SLH & G26SCM

£17.50

find out more

Glow start mains charger

£6.50

!!<

Input - 240V AC 50Hz
Output - 1.2V/160mA
3 Pin UK

>!! Only £4.20 when purchased with , see above for details.
find out more

Irvine C40H twin needle carb

£38.00

This is an excellent carb !!<

All metal construction
13.5mm fitting and
8mm venturi
it is held in place with two M3.5 screws supplied.
Japanese made
For 40 ...
find out more

FS-62V

£212.00

The second engine in the new 'V' series of O.S. four strokes is targeted at both sports and scale modellers alike. Like he FS-95V, the FS-62V ...
find out more

CLAMP ON VICE 50MM JAWS

£15.00

Diecast aluminium with plated jaws and bench clamp.
find out more

150mm STEEL RULE

£2.70

Double sided with hang hole. Permanently etched graduations of cm/mm and inches, 1/8", 1/16", 1/32" and 1/64". Display packed.
find out more

10 BLADE METRIC FEELER GAUGE SET

£3.20

Set your tappets with ease. 100mm long taper blades. Each blade is marked with its size and folds into a plated steel case with thumbscrew. Blade sizes: Metric: 0.05, 0.10, ...
find out more

65MM REACH X 75MM SPREAD TWIN LEG REVERSIBLE PULLER

£17.00

Make easy work of removing prop drivers and similar with this neat little puller with two reversible legs. suitable for external and internal pulling of gears, bearings, etc. Legs are forged ...
find out more

6 PIECE 140MM NEEDLE FILE SET

£6.50

Moulded plastic handles. packed in plastic storage wallet. Contains; flat parallel; flat taper; half round; round; square and three square files.
find out more

4 PIECE WARDING FILE SET

£6.50

Four handy files in a plastic wallet. Contains a flat parallel, round, square and three square (triangle).
find out more

125MM SPRING LOADED COMBINATION PLIERS

£5.50

Induction hardened cutting edges. Incorporates a side cutter.
find out more

125MM CARBON STEEL BENT NOSE PLIERS

£6.50

Carbon steel, hardened and tempered with textured grips and captive double leaf springs. Jaws angled up to 30°. Display packed.
find out more

115MM SPRING LOADED DIAGONAL SIDE CUTTER

£5.50

Induction hardened cutting edges. Spring-loaded handles for user comfort. Display packed.
find out more

J'EN Two Stroke Spares

Just Engines Online | Engine Spares | Two Stroke Spares | J'EN Two Stroke Spares

J'EN Spares

We pride ourselves on our after sales support and as such, keep large stocks of spares for all our 'own brand' engines.

Most spares orders are despatched the same day.

J'EN Engine Spares

J'EN Carb Spares

The J'EN37 - J'EN91 use the J’EN ‘TN2’ carb. Complete Carb assembly (6000) and Carb parts are listed below the engine parts for each engine model.

Notes on the TN2 carb:

The carb. is a nice easy to operate twin needle carb. based on well proven designs

The idle needle is sold as part of sub-assembly 6007, however, to check or replace this part you will need to disassemble the carb To do this remove barrel bolt (6017) and slide the barrel (6009) out of the carb body (6007) being careful not to lose the internal spring (6006). Loosen the assembly nut on the side of the carb body [tip; keep the needle (6001) in the valve when using pliers or mole grips otherwise you will risk making the valve oval and not round shaped!] until it comes loose. Remove the needle (6001) and ratchet clip (6012) from the valve and push through carb body (6007).

To replace simply reverse the procedure above.

Inlet nipple (6013), carb arm (6016), idle needle with o-ring (6010), needle valve assembly (6007) and carb body o-ring (6008) are the other orderable spares.

J'EN .37 Spare parts

Quantity:

Part Select

People who bought this item also bought:

1. JEN .37

2. Silicon Clamps

3. APC 12x6

J'EN .47 Spare parts

Quantity:

Part Select

People who bought this item also bought:

1. 2 Blade Aluminium Spinner

2. APC 11x7

3. MAX 55AX Spares

J'EN .57 Spare parts

Quantity:

Part Select

People who bought this item also bought:

1. APC 11x6

2. Extension 37mm 12mm

3. J'EN '4' Two Stroke Plug

J'EN .91 Spare parts

Quantity:

Part Select

People who bought this item also bought:

1. MAX 40LA Spares

2. J'EN '4' Two Stroke Plug

3. OS 46 FX Compatible Piston & Liner

Questions

Please ring, fax or email for more information or pricing, or if you can't see what you need.
Tel: 01747 835817, Fax: , Email: justengines@enterprise.net

Just Engines Online | Engine Spares | Two Stroke Spares | J'EN Two Stroke Spares