Say goodbye to rounded off nutd with these spanners forged from carbon steel hardened, tempered, chrome plated and mirror polished. they have a 15° offset jaw which make them ideal for use in confined areas. 4.0, 4.5, 5.0, 5.5, 6.0, 7.0, 8.0, 9.0, 10.0 and 11.0mm

Handles with swivel top. Chrome vanadium steel. 3 plain slot size: 2, 3, 4mm 3 cross slot: no. 00, 0 and 1

Always have the full set when you need them! Manufactured from chrome vanadium steel hardened and tempered. Held in pocket knife style plastic holder with non-slip grip.
Contents: 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0 and 8.0mm.

Always have the full set when you need them! Manufactured from chrome vanadium steel hardened and tempered. Held in pocket knife style plastic holder with non-slip grip.
Contents: 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 1/4 and 5/16".

A set of handy carbon steel hardened and tempered pliers. The jaws and cutting edges are induction hardened with captive double leaf springs and soft grip handles. Contains; flat nose pliers, long nose pliers, bent nose pliers, diagonal side cutters and end cutting pliers.

Induction hardened cutting edges, side cutter and a spring-loaded soft handles for user comfort.

Induction hardened cutting edges. Spring-loaded handles for user comfort. Display packed.

Carbon steel, hardened and tempered with textured grips and captive double leaf springs. Jaws angled up to 30°. Display packed.

Induction hardened cutting edges. Incorporates a side cutter.

Four handy files in a plastic wallet. Contains a flat parallel, round, square and three square (triangle).

Moulded plastic handles. packed in plastic storage wallet. Contains; flat parallel; flat taper; half round; round; square and three square files.

Make easy work of removing prop drivers and similar with this neat little puller with two reversible legs. suitable for external and internal pulling of gears, bearings, etc. Legs are forged carbon steel and have long and short reach facility. Yoke and thrust bolt are manufactured from carbon steel.

Set your tappets with ease. 100mm long taper blades. Each blade is marked with its size and folds into a plated steel case with thumbscrew. Blade sizes: Metric: 0.05, 0.10, 0.15, 0.20, 0.30, 0.40, 0.50, 0.60, 0.70, and 0.80mm

Double sided with hang hole. Permanently etched graduations of cm/mm and inches, 1/8", 1/16", 1/32" and 1/64". Display packed.

Diecast aluminium with plated jaws and bench clamp.